Français - Bosch GCM 10 GDJ Professional Notice Originale

To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times.
Always remove dust and chips after working by blowing out
with compressed air or using a brush.
– Clean the guide roller (20) and the glide arm (23) regu-
larly.
Accessories
Screw clamp
Insert plates
Dust bag
Dust extraction adapter
Applies to the following models:
3 601 M27 04./... 0L./... 08./... 0B./... 0K.
Saw blades for wood and fibreboard, panels and strips
254 x 25.4 mm saw blade, 40 teeth
Saw blades for hardwood, composites, plastic and non-
ferrous metals
254 x 25.4 mm saw blade, 40 teeth
254 x 25.4 mm saw blade, 40 teeth
254 x 25.4 mm saw blade, 40 teeth
Applies to the following models:
3 601 M27 00 /... 03 /... 07 /... 06.
Saw blades for wood and fibreboard, panels and strips
254 x 30 mm saw blade, 40 teeth
Saw blades for hardwood, composites, plastic and non-
ferrous metals
254 x 30 mm saw blade, 80 teeth
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Article number
1 609 B06 203
1 609 B04 263
1 609 B04 264
Only for EU countries:
1 609 B02 595
According to the European Directive 2012/19/EU on Waste
2 607 001 977
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
2 608 676 047
Français
2 608 640 969
2 608 640 970
Consignes de sécurité
2 608 640 971
Avertissements de sécurité généraux pour l'outil
électrique
AVERTISSE-
2 608 642 530
MENT
avec cet outil électrique. Ne pas suivre les instructions
2 608 642 528
énumérées ci-dessous peut provoquer un choc électrique,
un incendie et/ou une blessure sérieuse.
Conserver tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.
Le terme "outil électrique" dans les avertissements fait réfé-
rence à votre outil électrique alimenté par le secteur (avec
cordon d'alimentation) ou votre outil électrique fonctionnant
sur batterie (sans cordon d'alimentation).
Sécurité de la zone de travail
Conserver la zone de travail propre et bien éclairée.
u
Les zones en désordre ou sombres sont propices aux ac-
cidents.
Ne pas faire fonctionner les outils électriques en at-
u
mosphère explosive, par exemple en présence de li-
quides inflammables, de gaz ou de poussières. Les ou-
Do not dispose of power tools along with
household waste.
Lire tous les avertissements de sé-
curité, les instructions, les illustra-
tions et les spécifications fournis
1 609 92A 5U5 | (01.10.2020)
Français | 43