MZ electronic EV-020 Instructions D'utilisation page 37

Measurement menu
Use the (DOWN) or
Reset Measurement
Resets the chain measurement value
(0.0).
Units
Selects the unit of measurement:
Feet/ inches
Metres / centimetres
Rope_Chain
It is possible to enable the function and
set the value at which the sensor
passes from rope to chain. Setting
range 0.1 - 25.0 (metres or feet). This
value corresponds to the chain length.
To obtain this function, install
sensor CMCT-01 (optional).
Exit
To return to the settings menu.
EV-020
Measure
R e s e t M e a s u r e
U n i t s
R o p e _ C h a i n
E x i t
(UP) key to move around the parameters.
Select with
Confirm with
Select with
Confirm with
Select with
Set value with
Confirm with
Confirm with
N o
F e e t
O f f
= Yes
= Feet
37
English
= No
= Metres
Rev. 04 – 2007