MZ electronic EV-020 Instructions D'utilisation page 34

Starting up
The chain counter features a graphic display and three
keys: (ON),
also a buzzer that indicates the pressing of the keys or
attracts the user's attention in particular conditions (alarm
triggering).
The ON key switches on the display and enables the
other two keys. It must be used to access the parameter
setting menus. For selecting the parameters to be
modified and to confirm the values set. The display
backlight will switch off 30 seconds after the last
command given (adjustable default time – see "BkLight
Time").
The UP key commands the hoisting of the anchor and the
DOWN key casts it. When the key is released, the action
is stopped. During parameter setting, the two keys allow
the User to move around the menu and vary parameter
values.
When switched on, the instrument will make a beep and
the following page will appear for a few seconds:
EV-020
(UP) and (DOWN). There is
34
English
Rev. 04 – 2007