Smeg SMF02 Manuel D'utilisation page 27

Problem
The mixer vibrates
The attachments hit the
walls of the bowl
Cleaning and Care
Possible cause
The mixer is not resting on a stable
surface.
The anti-slip rubber feet are worn.
The speed used is too high or the
load is excessive.
The bowl has not been correctly
locked into its base.
The lower attachment shaft has
come loose over time.
The attachment or the bowl is not
properly inserted.
Solution
Place the mixer on a flat,
stable surface.
Have them replaced at an
Authorized Service Center.
Set a lower speed and
ensure the bowl has not
been overfilled.
Check that the bowl is
correctly locked into its
base.
Have the mixer checked
and adjusted at an
Authorized Service Center.
Turn the speed selector to
0, press the button on the
back to lift the head to
check that the attachment is
inserted correctly in the
lower attachment shaft and
that the bowl is inserted
correctly in the base.
27