6. Slip the attachment (6) onto the lower
attachment shaft (7) and push it upwards.
Keep pressing the attachment upwards
and turn it counterclockwise until the
pin (8) locks fully into place.
8
Ensure that the attachment is
correctly locked into place on the
attachment shaft.
Use
7. Add the ingredients to the bowl.
8. To close, bring the motor head down by
9. Keep the button pressed down and
7
6
10. Position the pouring shield (9) on the
6
pressing the release button (1), and then
tilt the motor head (2) backwards slightly
until it releases.
lower the head (2), accompanying its
movement with your hand.
2
bowl if required, with the chute facing
outwards.
9
1
15