What To Do If - Smeg SMF02 Manuel D'utilisation

4.4 What to do if...

Problem
The motor will not start
26
Cleaning and Care
Possible cause
The motor has overheated.
The plug is not properly inserted in
the power socket.
The cable is defective.
Lack of power.
The head has been raised during
operation.
Solution
Disconnect the mixer from
the power and leave the
motor to cool.
Insert the plug into the
power socket. Do not use
adaptors or extensions.
Check that the breaker is
on.
Have the cable replaced at
an Authorized Service
Center.
Check that the house main
breaker is on.
The safety lock system has
operated. Move the speed
selector to 0 (OFF), press
and hold down the button
on the rear to release the
head and lower it.