Product Specification; Certificates; Specifications - Mettler Toledo InPro 6880 i Série Instructions D'utilisation

InPro 6880 i Series O
8

Product specification

8.1

Certificates

Each sensor is delivered with a set of 3.1 certificates
(complying with EN 10204.3/1.B).
All wetted metal parts (sensor shaft, cap sleeve and
opto-cap) are identified with a engraved symbol cor-
responding to the heat number on the paper certificate
delivered with the sensor.
Each wetted metal part (sensor shaft, cap sleeve and
opto-cap) is polished in order to get a surface rough-
ness lower than 0.4 µm (16 µin). This represents a
roughness grade number of N5 (according to ISO
1320:1992).
8.2

Specifications

Measurement principle
Working conditions
Permissible pressure range
during measurement
Mech. pressure resistance
Permissible temperature
range during measuring
Mechanical temperature
resistance
Sensor performance
Detection limit
in aqueous media
liquids containing CO
Accuracy:
– in aqueous media
– liquids containing CO
Response time at
25 °C (77 °F) (air –> N
Design features
Temperature compensation
Cable connection:
– digital
Wetted O-rings
O selective membrane mat.
2
Wetted sensor parts
Surface roughness of
wetted s/steel parts
(EN 1320: 1996)
Certificates (MaxCert™)
Quality (Final inspection Cert.)
FDA/USP Class VI
Material certificate 3.1
Surface finish certificate 2.1
© 09/07 Mettler-Toledo AG
Printed in Switzerland
Sensor 12 mm
2
2
2
)
2
InPro 6880 i
optical
0.2...6 bar absolute
(2.9...87 psi)
max. 6 bar absolute
(max. 87 psi)
5...60 °C
(41...158 °F)
– 20...130 °C
(– 4...266 °F)
(steam-sterilizable autoclavable)
8 µg/l [8 ppb]
8 µg/l [8 ppb]
≤ ±[1%+8 ppb]
≤ ±[1%+8 ppb]
t < 45 s
98%
automatic with built-in RTD
Data cable 5 pin
EPDM FDA approved (other mat.on
request)
Silicone
S/steel 1.4404, [AISI 316L] PPS
with material certificate 3.1 (other
materials on request)
Ra <0.4µm [16µ in]
yes
yes
yes
yes
21
InPro 6880 i
52 206 256