Www.technics.com/Support - Technics SU-G30 Manuel D'utilisation

AC IN 〜
SPEAKERS
(4〜16Ω)
USB 2.0 cable
(not supplied)
■
Preparation
Connecting to a PC
• Before connecting to a PC, follow the steps
below.
• Refer to the following for the recommend OS
versions for your PC (as of December 2015):
- Windows 7, Windows 8, Windows 8.1,
Windows 10
- OS X 10.7, 10.8, 10.9, 10.10, 10.11
Download and install the dedicated driver to
the PC. (Only for Windows OS)
• Download and install the driver from the
website below.

www.technics.com/support/

Download and install the dedicated app
"Technics Audio Player" (free of charge) on
your PC.
• Download and install the app from the
website below.
www.technics.com/support/
You can connect the USB-B terminal and a PC, etc.
with a USB cable and play back music on the PC, etc.
with this unit.
1 Disconnect the AC power supply cord.
2 Connect this unit and a PC, etc.
3 Connect the AC power supply cord to
this unit. ( 17)
4 Press [ ] to turn this unit on.
5 Press [DIGITAL] repeatedly to select
"PC".
• You can also select the input source by
turning the input selector knob on the unit.
6 Start playback using the dedicated
app "Technics Audio Player" on the
connected PC.
Note
• About supported format, refer to "File format"
( 49)
Using PC, etc.
ST-G30
PC, etc.
Operations (33)
33