Technics SU-G30 Manuel D'utilisation page 18

Connections
Network settings
You can stream music from an iOS device (iPhone/iPad/iPod), an Android™ device or a PC (Mac/
Windows) to this unit by using the AirPlay or DLNA feature. ( 24, 26)
To use these features, this unit must join the same network as the AirPlay compatible device or the DLNA
compatible device.
PHONES 5V 2.1A
This system can be connected to a router using a
LAN cable or built-in Wi-Fi
For a stable connection to the network, a wired
LAN connection is recommended.
Wired LAN connection
LAN
OPT COAX1 COAX2 PC
10BASE-T /
DIGITAL IN 100BASE-TX
LAN cable
(not supplied)
1 Disconnect the AC power supply cord.
2 Connect this unit to a broadband
router, etc. using a LAN cable.
3 Connect the AC power supply cord to
this unit, and press [ ]. ( 17)
• When the connection is established, "
displayed.
18
(18)
VOLUME
INPUT SELECTOR
.
®
AC IN 〜
SPEAKERS
(4〜16Ω)
Broadband
router, etc.
Note
• If you try to change the network settings
immediately after turning on this unit, it may
take some time until the network setup screen
is displayed.
Note
• While the AC power supply cord is
disconnected, the LAN cable must be
connected or disconnected.
• Use category 7 or above straight LAN cables
(STP) when connecting to peripheral devices.
• Inserting any cable other than a LAN cable in
the LAN port can damage the unit.
• If the LAN cable is disconnected, the network-
related settings return to default. Make the
settings again.
• When a LAN cable is connected, the Wi-Fi
function may be disabled.
" is