Display - Technics SU-G30 Manuel D'utilisation

Operations
Using Bluetooth
You can listen to the sound from the Bluetooth
wirelessly.
• Refer to the operating instructions of the Bluetooth
■
Pairing a Bluetooth
• Turn on the Bluetooth
and place the device near this unit.
• If a Bluetooth
device is already connected,
®
disconnect it. ( 31)
1 Press [DIGITAL] repeatedly to select
"Bluetooth".
• You can also select the input source by
turning the input selector knob on the unit.
2 Press [MENU].
3 Press [ ], [ ] repeatedly to select
"Pairing" and then press [OK].
4 Press [ ], [ ] to select "Yes" and then
press [OK].
• "Pairing" is displayed, and this unit waits for
registering.
5 Select "SU-G30" from the Bluetooth
device's menu.
• The name of the connected device is
indicated on the display.
• MAC address may be displayed before "SU-
G30" appears. (e.g. 6C:5A:B5:B3:1D:0F)
Note
• If prompted for the passkey, input "0000".
• You can register up to 8 devices with this unit.
If a 9th device is paired, the device that has not
been used the longest will be replaced.
30
(30)
®
PHONES 5V 2.1A
device
®
feature of the device
®
®
audio device from this unit
®
® device for details.
VOLUME
■
Listening to music stored on a Bluetooth
device
1 Press [DIGITAL] repeatedly to select
"Bluetooth".
• "Ready" is indicated on the display.
• You can also select the input source by
turning the input selector knob on the unit.
2 Select "SU-G30" from the Bluetooth
device's menu.
• The name of the connected device is
indicated on the display.
3 Start playback on the Bluetooth
device.
Note
• This unit can only be connected to one device
at a time.
INPUT SELECTOR
®
®
®