Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Indicator LED status with battery charging:
- LED indicator light (14) RED fixed: the device is correctly connected to the power cable and the battery is being charged.
- LED indicator light (14) GREEN fixed: charging operation completed, the battery is charged.
Note: Do not connect the appliance to an outlet with a voltage other than that indicated.
BASIC FUNCTIONS
POWER ON/OFF
Set the main switch POWER ON/OFF(12) to "ON" to turn on and use the device with its internal battery.
Set the main switch POWER ON/OFF(12) to "OFF" to completely switch off the device or charge the battery.
STAND-BY
It is possible to bring the appliance into Stand-by mode using the button
Caution:
-
In stand-by function there is no LED indicating.
-
Leaving the unit in stand-by function the battery discharges faster than using the POWER ON/OFF switch(18).
MODE
SETTING FUNCTION
To change the mode function, press more times the
BLUETOOTH (on display BLUE), USB/Micro SD (only if the socket USB(8)/Micro SD socket(7) is connected to a memory, a small
writing "USB" or "SD" appears on the display), AUX-IN (on display LINE).
ADJUSTING THE VOLUME
1. Turn the VOLUME knob(19) to increase or decrease the general playback volume or use the Vol+(10) and Vol-(6) buttons on
the remote control for finer adjustment;
Attention: the two settings add up, therefore, to have the maximum volume it is necessary that both settings are at maximum,
while, if the VOLUME knob (19) is at minimum, increasing that of the remote control will not change.
2. Turn the MIC VOL knob (16) to adjust the volume of the signal at the MIC input(11).
PRE-EQUALIZER
This unit has a pre audio equalization system set. Press the EQ button(5) on remote control to select one of 6 available audio
equalizers, and that best suits the sound playback.
SETTING TONE TREBLE AND BASS
Turn the TREBLE knob(18) to adjust the high tones.
Turn the BASS knob(17) to adjust the bass tones.
ECHO EFFECT
Turn the ECHO knob(15) to increase or decrease the echo effect on the input MIC.
Note: the echo only works on microphone input.
DISCO-LIGHT EFFECTS
Press the LED switch(13) to activate the Disco-Light effect on the loudspeaker.
To deactivate the Disco-Light effect, press the LED switch(13) again.
BLUETOOTH FUNCTION
1. Switch the appliance on and press the button
function; the word "BLUE" appears on the display;
2. In the Bluetooth mode, the symbol
go into search mode;
3. Activate the Bluetooth feature on the external device to be coupled;
4. Initiate a search for devices. After select the "XF 1500 KB";
5. Enter the password "0000" if required;
6. Press the
(3) button on the unit or the key(3) on remote control, to start playing and the buttons
unit, or the keys
:
(9) and
(1)
(1) on the unit or the MODE button(2) on remote control and select the bluetooth
and the word "BLUE" on the display will start to flash and the system will automatically
9
(4) for selection of songs.
(
2)
on the remote;
key on the unit or press MODE button(2) on the remote control to select:
12
XF 1500 KB
:
9
(4) o
(2) on the
Publicité
