ARTHUR MARTIN AW6F4742AB Notice D'utilisation page 6

6
5. Remove the polystyrene protection from the
bottom. Put the appliance back into an upright
position.
7. Remove the three transit bolts and pull out the
plastic spacers.
We recommend that you
keep the packaging and the
transit bolts for any transport
of the appliance.
Information for installation
1. Positioning and levelling
Correctly adjusting the appliance so that it
is level prevents vibration, noise and
movement of the appliance when in
operation.
1. Install the appliance on a flat hard floor.
The appliance must be levelled and
stable. Make sure that the appliance does
not touch the wall or other units and there
is air circulation below the appliance.
1
2
6. Remove the power supply cable and the drain
hose from the hose holders.
It is possible to see water flowing from the drain
hose. This is because the washing machine has
been tested at the factory.
8. Put the plastic caps, that you find in the user
manual bag, in the holes.
2. Loosen or tighten the feet to adjust the
level. All feet must rest firmly on the floor.
WARNING! Do not put
cardboard, wood or equivalent
materials below the appliance
feet to adjust the level.
x4