ARTHUR MARTIN AW6F4742AB Notice D'utilisation page 13

The final spin is not performed. The
water of the last rinse is not drained out
to prevent the fabrics from creasing.
The washing programme ends with
water in the drum.
The door stays locked and the drum
turns regularly to reduce creasing. You
must drain the water to unlock the door.
If you touch the Départ/Pause
button, the appliance performs the
spinning phase and drains the water.
• Night . The related indicator comes
on.
The intermediate and the final spinning
phases are suppressed and the
programme ends with water in the
drum. This helps to reduce creasing.
The door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available.
In some programmes the rinses are
performed with more water.
If you touch the Départ/Pause
button, the appliance performs only the
draining phase.
The appliance empties the
water out automatically after
approximately 18 hours.
Prélavage
With this option you can add a prewash
phase to a washing programme.
The relevant indicator illuminates.
• Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust, mud and other solid
particles.
These options can increase the
programme duration.
Permanent Rinçage Plus
With this option you can add a few rinses
according to the selected washing
programme.
Use this option for people with allergies to
detergent residues and with sensitive skin.
This option increases the
programme duration.
The corresponding indicator above the
touch button illuminates and also stays
permanently on during next cycles until
this option is deactivated.
Permanent Douceur Plus
Set this option to optimise the fabric
softener distribution and improve fabric
softness.
Recommended when you use fabric
softener.
This option increases the
programme duration.
The corresponding indicator above the
touch button illuminates and also stays
permanently on during next cycles until
this option is deactivated.
Départ Différé
With this option you can delay the start of
a programme to a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases in
steps of 1 hour up to 20 hours.
After touching the Départ/Pause
button, the display shows the indicator
and the selected delay time and the
appliance begins the countdown and the
door is locked.
Time Manager
With this option you can reduce the
programme duration depending on the
load size and the degree of soiling.
13