ARTHUR MARTIN AW6F4742AB Notice D'utilisation page 22

22
Make sure that the flap does not cause a
blockage when you close the drawer.
Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Départ/Pause
button flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or the
spin speed, touch the related buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds.
Starting a programme
Touch the Départ/Pause
start the programme.
The related indicator stops flashing and
stays on.
The programme starts, the door is locked.
The display shows the indicator
The drain pump can operate
shortly before the appliance fills
water.
Starting a programme with the
delay start
1. Touch the Départ Différé
repeatedly until the display shows the
desired delay time. On the display the
indicator shows
2. Touch the Départ/Pause
The appliance door locks and starts the
countdown of the delay start. The display
shows the indicator
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Départ/Pause
2. Touch the Départ Différé
3. Touch the Départ/Pause
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Départ/Pause
2. Touch the Départ Différé
button to
3. Touch the Départ/Pause
The SensiCare System load
.
detection
After touching the Départ/Pause
button:
1. The SensiCare System starts
button
.
pause the appliance. The related
indicator flashes.
repeatedly until the display shows
and the indicator
again to start the programme
immediately.
pause the appliance. The related
indicator flashes.
repeatedly until the display shows the
desired delay time.
again to start the new countdown.
estimating the weight of the load to
calculate the real programme duration.
During this phase the Time Manager
button.
.
button to
button
goes off.
button
button to
button
button