EUROM Electric Weedburner 2 in 1 Mode D'emploi page 34

Option 2: BBQ/fire-starter

When used to light the BBQ and/or an open fire, the device must be used without the
extension piece.

Place the BBQ mouthpiece on the burner mouth (attachment method is the same as
securing the mouthpiece for burning weeds)

Place the mouthpiece under the coals or wood

Make sure that any fire-lighters are positioned correctly

Insert the plug into the socket.

Check that the mouthpiece is not blocked before switching the device on.

Slide the ON/OFF and power switch to setting II; the device will start working.

Remove the device from the coals or wood blocks one they start to glow.

Then blow hot air into the coals or wood at a distance of around 10-20 cm until the coals or
wood burn properly.

Damage to the BBQ mouthpiece will be avoided if you follow these instructions. Exposing
the mouthpiece to high temperatures for a long period could lead to damage. Follow these
instructions to ensure that the product functions effectively in the long term.
NB: Never heat the coals or wood longer than necessary as this could damage your BBQ or
open fire.
Cooling, switching off and storing
Before the device is completely switched off, it must be allowed to cool. Set the output switch to
setting I for at least 1 minute, then the device can be switched off properly. The device can be
left on the stand while cooling down. Never leave the device unattended.
Make sure that the whole device is cooled before storing.
Cleaning and maintenance
NB: Before cleaning and maintaining the device, ensure that the plug is removed from the
socket and that the device has cooled down completely.
Keep safety devices, ventilation openings and the motor casing free of dust and dirt. Clean the
machine with a clean cloth or blow dust out with compressed air, under low pressure. We
recommend that the machine is cleaned after each use.
Clean the machine regularly with a damp cloth and a little soap. Do not use aggressive cleaning
agents or solvents; they could damage the plastic components on the machine. Make sure that
water does not penetrate the machine's inner workings.
Removal
In the EU this symbol indicates that this product may not be disposed of as
ordinary household waste. Old equipment contains valuable materials, suitable
for recycling. These materials should be made suitable for reuse in order to
prevent any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact the original
supplier, who can make sure that as many of the components as possible can
be recycled.
34