Setting The Dynamic Soundstage Organizer; (Dso); Selecting The Spectrum Analyzer (Sa) - Sony CDX-M630 Mode D'emploi

Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).
You can store the DSO setting for each source.
1
Press (SOURCE) to select a desired
source.
2
Press (DSO) to select "1, 2, 3" or "off".
To cancel the DSO mode, select "DSO off."
After 3 seconds, the display returns to the
normal playback mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set DSO to off.
24
Selecting the spectrum
analyzer (SA)
The sound signal level is displayed on a spectrum
analyzer. You can select a display for 9 patterns
(1 to 9), Auto, or "off."
1
Press (SOURCE) to select a desired
source.
2
Press (MENU).
3
Press M or m repeatedly until "SA"
appears.
4
Press < or , repeatedly to select the
desired setting.
5
Press (ENTER).