If the front panel does not open
because of a blown fuse
1
Remove the front cover
1 Press the clip inside the front cover
with a release key (supplied), and
pry the front cover free.
Release key (supplied)
Note
To protect the surface of the unit, put thin cloth
between release key and the unit by inserting the
release key.
2 Repeat step 1 on the left side.
The front cover is removed.
2
Remove the unit
1 Use a release key to push in the clip
on the left side of the unit, then pull
out the left side of the unit until the
catch clears the mounting.
2 Repeat step 1 on the right side.
3 Slide the unit out of the mounting.
27