Setting The Dynamic Soundstage Organizer; (Dso); Mp3 Playable Cd Unit (Optional); Listening To An Mp3 File - Sony CDX-CA700X Mode D'emploi

Masquer les pouces Voir aussi pour CDX-CA700X:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2 Press either side of (DISC/PRESET)
to adjust the desired volume level.
The volume level is adjustable in 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5
Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.
Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers in the dashboard (virtual
speakers).
You can store the DSO setting for each source.
1
Press (SOURCE) to select a source
(radio, CD, or MD).
2
Press (DSO) repeatedly until "DSO-
ON" appears.
To cancel the DSO function, select "DSO-OFF"
in step 2.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set DSO to
OFF.
22
MP3 playable CD Unit
(optional)
This unit can control external MP3 playable CD
units with the CUSTOM FILE functions.
If you connect the optional MP3 playable CD
units, you can play discs containing MP3 files
and use the CUSTOM FILE functions (page 11,
12).

Listening to an MP3 file

1
Press (SOURCE) repeatedly to select
"CD."
2
Press (MODE) repeatedly until the
appropriate indication for the MP3
playable CD unit ("CD1," "CD2," etc.)
appears.
Playback starts.
To
Press
(OFF)
Stop playback
(OPEN) then Z
Eject the disc
(SEEK) (./>)
Skip tracks
– Automatic
[once for each track]
Music Sensor
(SEEK) (m/M)
Fast-forward/
reverse
[hold to desired point]
– Manual Search
(DISC/PRESET) (+/–)
Skip discs
– Disc selection
[once for each disc]
(DISC/PRESET) (+/–)
Skip albums
– Album selection
[hold to desired point]
When the last file on the disc is over
The file number indication returns to "1," and
playback restarts from the first file of the disc.
Notes
• If a disc with no MP3 files (tracks) is inserted, "CD"
appears in the disc type display to start playback but
there will be no sound.
• Before playing a track, this unit reads all track and
album information on the disc. Depending on the
track structure, it may take more than a minute
before play begins. During this time, "READ" is
displayed. Please wait for play to start automatically
when the reading is complete.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cdx-ca700

Table des Matières