Device Description; User Interface; Button Description; Sensors Description - ADEUNIS LoRaWAN Europe EU863 Guide Utilisateur

FIELD TEST DEVICE - LoRaWAN Europe - Guide utilisateur / User guide version V1.2.3

2. DEVICE DESCRIPTION

2.1. User interface

FR
LCD screen
EN
Pushbutton 1

2.2. Button description

Interface operation
Pushbutton 1
Pushbutton 2
ON/OFF Switch
Micro-USB connector
Charge indicator

2.3. Sensors description

The product also has two on-board sensors: a temperature sensor and an accelerometer. This one sends a frame when a large vibration is
detected (by shaking the device for example).
Figure 3 : Front view
This button allows you to carry out radio transmissions in manual mode. In the PER menu, a long
press will allow you to reset the counters to zero.
This button allows you to manage the LCD screen.
When the LCD back-light is switched off, pressing this button will switch on the back-light.
When the LCD back-light is switched on, each press will allow you to scroll through the different
screens available on this device.
The ON/OFF switch allows you to switch the device on or off. Moving the switch to the right will turn
the device on.
The micro-USB connector allows you to charge the device (see paragraph 1.4) or configure it (see
paragraph 3).
The charge LED shows you the device's charge status (see paragraph 1.4).
ON/OFF switch
Figure 4 : rear view
Charge indicator
Push button 2
Micro USB connector
Page 38 of 55