Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FIELD TEST DEVICE - LoRaWAN Europe - Guide utilisateur / User guide version V2.0.0
2. DEVICE DESCRIPTION
2.1. User interface
LCD screen
Push button 1
2.2. Button description
Interface operation
Push button 1
Push button 2
ON/OFF Switch
Micro-USB connector
Charge indicator
2.3. Sensors description
The product also has two on-board sensors: a temperature sensor and an accelerometer. This one sends a frame when a large vibration is
detected (by shaking the device for example).
Front view
This button allows you to carry out radio transmissions in manual mode.
On the PER menu, a long press reset the counters to zero.
A long press on the push button 1 and 2 simultaneously will lock the button 1, deactivate the accel-
erometer and force the periodical mode.
This button allows you to manage the LCD screen:
•
When the LCD back-light is switched off, pressing this button will switch on the back-light.
•
When the LCD back-light is switched on, each press will allow you to scroll through the differ-
ent screens available on this device.
A long press on this push button enables to see the Configuration screen.
The ON/OFF switch allows you to switch the device on or off. Moving the switch to the right will turn
the device on.
The micro-USB connector allows you to charge the device or configure it.
The charge LED shows you the device's charge status.
ON/OFF switch
Rear view
Charge indicator
Push button 2
Micro USB connector
Page
35
of 50
FR
EN
Publicité
Table des Matières
