ADEUNIS LoRaWAN Europe EU863 Guide Utilisateur page 50

FIELD TEST DEVICE - LoRaWAN Europe - Guide utilisateur / User guide version V1.2.3
S382 : Class and ACK Mode
The range will allow you to select the method of functioning for the device:
• Unconfirmed Mode
• Confirmed Mode
S383 : Uplink Port
FR
The communication port for the Uplink frame can be configured in this frame. You can select a value between 1 and 223
S385 : Personalize Payload Size
This option allow to send a define payload instead of the standard define inside the product
EN
The user can set the size of the payload and the text to send
When the value of the register is set to , the function is deactivated and the product use the standard payload.
When the value get a number, the product send the characters of the registers S386 to S389.
S386 to S389 : Personalize Payload Text
The 4 registers allow to set a specific payload :
• The register S386 allow to define the bytes 1 to 4 of the frame
• The register S386 allow to define the bytes 5 to 8 of the frame
• The register S386 allow to define the bytes 9 to 11 of the frame
• The register S386 allow to define the bytes 12to 16 of the frame
The value must be set in hexadecimal code : example for the «TEST» word --> 54455654
WARNING : The register need to be completed with zero to send a byte, or the product will completed by himself the register and you will not
have the result you would like to have. Example with : ATS385=1.
• ATS386=AB000000
• ATS386=AB
5.4.2 Network register
Range
S201
S204
--> The system understand the frame AB000000 and send the first byte --> You will receive AB
--> The system understand the frame 000000AB and send the first byte --> You will receive 00
Content
Spreading Factor value
RESERVE
Default value
7 : SF7
8 : SF8
9 : SF9
12
10 : SF10
11 : SF11
12 : SF12
34C194C1 Read-only
Comments
Page 50 of 55