Télécharger Imprimer la page

Häfele DFT V2 Notice D'emploi page 14

Masquer les pouces Voir aussi pour DFT V2:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

6.
Allocating locking authorisations
6.1 Keyed alike operation
6.2 Individually
addressable operation
7.
Clearing locking authorisations
7.1 Clearing the locking
authorisation of
individual keys
7.2 Procedure to follow if a
user key is lost
14
NOTE
Warning of abuse!
Unauthorised persons obtain locking authorisations with programming and clearing keys.
> Only personnel who are authorised by the operator may allocate locking authorisations!
> Take care when allocating locking authorisations to avoid overlapping or mistakes.
> Keep programming and clearing keys in a safe place and protect from abuse.
Up to 16 MLA 8s can be switched in sequence in this operating mode, i.e. up to a maximum of
128 outputs can be controlled.
For step-by-step instructions „Allocating locking authorisations - keyed alike"
see illustrations starting on page 43.
In order to be able to assign locking authorisations, the addresses of the locks must be defined.
This operating mode can only be used in conjunction with the MLA 8.
Output
1
EFL 3
1
EFL 3
MLA 6
Power Output
Adresse
Antenna/LED
Adress
Adresse
Dirección
Indirizzo
Address 1 is reserved for the lock directly connected to the DFT. The first lock that is connected to
the MLA 8 has address 2, the second has address 3, etc. These addresses must be considered
when allocating the locking authorisations. Locking authorisations for several addresses or locks
can be assigned to one user key, for example, for lock 1, 4 and 7.
For step-by-step instructions „Allocating locking authorisations - individually
addressable (with MLA 8)" see illustrations starting on page 44.
For step-by-step instructions „Clearing individual locking authorisations"
see illustrations starting on page 45.
If a user key is lost, all user keys must be cleared from the DFT.
For step-by-step instructions „Clearing all locking authorisations" see
illustrations starting on page 46.
Then locking authorisations must be allocated to all of the required user keys again
(see chapter „6. Allocating locking authorisations").
PS1 / PS2
DFT
Power
supply
Output/
MLA 8
Adresse
Adress
Adresse
Dirección
Indirizzo
2
EFL 3
3
EFL 3
Power
4
in
EFL 3
DFT
5
2
EFL 3
EFL 3
3
EFL 3
6
EFL 3
4
EFL 3
5
EFL 3
6
7
EFL 3
EFL 3
7
EFL 3
8
8
EFL 3
EFL 3
9
EFL 3
9
EFL 3

Publicité

loading