Turning Power On/Off - Sharp PN-70TA3 Manuel D'installation

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• To keep the performance of the WHITEBOARD stable, put
the monitor in the Power off (Standby mode) state once a
day.
Turning on the main power
Main power switch
The monitor enters the Power off (Standby mode) state.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
• Before switching off the main power switch, always put the
monitor in the Power off (Standby mode) state. (Hold down
the POWER button until the exit screen appears.)

Turning Power On/Off

Turning power on
1. Press the POWER button.
Green lit
Orange lit
Orange flashing
Green flashing
• The WHITEBOARD appears.
POWER button / Power LED
Status
(Factory setting. Can be changed in START INPUT MODE
in the SETUP menu.)
Status of the monitor
Power on
Power off (Standby mode)
Power off
(Whiteboard standby mode)
Input signal waiting mode
7
E