Removing The Drawer; Replacing The Drawer - Bosch HGI8054UC Manuel D'utilisation Et D'entretien

Warming Drawer Maintenance

Removing the Drawer

9 CAUTION
To prevent burns, do not remove drawer while hot.
Be sure drawer is empty before removing.




Parts
1 Housing
2 Drawer
3 Housing slide
4 Drawer rail
1. Pull drawer to fully open position.
2. Press down right drawer clip.
3. Lift up left drawer clip.
4. Firmly pull the drawer straight out. Retract housing
slides while drawer is removed.
English 35

Replacing the Drawer

1. Be sure housing slides are pushed inside housing.
2. Align the drawer rails with the housing slides attached
to the drawer housing.
3. Firmly push the drawer straight into the drawer housing
until the drawer clicks into place. Note: The drawer has
a "push-to-open" operation. Pressing the lower center
front of the drawer causes the drawer to self-open.
4. Open and close drawer to test operation. Note: if the
drawer will not close, verify that the rails on the drawer
are properly aligned to housing slides and that the rail
release levers are properly positioned.