Spares And Accessories; Technical Specification - Bibby Scientific Stuart Microfuge SCF2 Manuel D'utilisation

Only spare parts supplied or specified by Stuart
or its agents should be used. Fitting of
non-approved parts may affect the performance
of the safety features designed into the
instrument. If in any doubt, please contact the
Service Department of Bibby Scientific Ltd. or the
point of sale.
For any other technical enquiries, please contact
the Technical Support Department:
E-mail: stuarthelp@bibby-scientific.com
Tel: +44 (0)1785 810433.

Spares and Accessories

Description
Strip tube rotor
0.5ml tube adaptors
0.2ml tube adaptors

Technical Specification

Rotor
Maximum rpm
Maximum rcf
Maximum capacity
Timer
Acceleration time
Deceleration time
Noise level
Safety
Power
Dimensions (w x d x h) mm
Weight
4
Catalogue Number
SCF2/2
SCF2/1/05
SCF2/1/02
Fixed angle rotor
13,500rpm
12,300 x g
12 x 1.5 or 2.0ml tubes
Warranty
Stuart warrants this equipment to be free from
defects in material and workmanship, when used
under normal laboratory conditions, for a period
of three (3) years. In the event of a justified
claim, Stuart will replace any defective
component or replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
installation, adaptation, modification, fitting of
non-approved parts or repair by unauthorised
personnel.
Bibby Scientific Ltd.
Beacon Road,
Stone, Staffordshire
ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
Fax: +44 (0)1785 813748
E-mail: equipment@bibby-scientific.com
www.stuart-equipment.com
SCF2
1 to 30 min (1 min intervals)
≤12s
≤16s
≤60dB
Door lock
220V, 50/60Hz
208 x 245 x 145
4.4kg (main body only)
Strip tube rotor
6,000rpm
1,850 x g (outer)
1,542 x g (inner)
4 x 0.2ml 8-tube strips