Ac Connection Process - Ingeteam INGECON SUN 1Play 2.5TL M Manuel D'installation Et Usage

AC connection

8.3. AC connection process

1. Wire the connector observing the instructions printed on it: line (L), neutral (N) and ground (ground
symbol).
Respect the installation of L, N and ground as described in this section for correct operation and for
the safety of the installation. If the lines L and N are reversed the inverter will not work.
Ingeteam accepts no liability for any consequences of incorrect connection.
2. Insert the connector as shown in the following figure.
3. Ensure the connection is firm, checking that the safety tab is properly inserted. If you wish to remove the
connector you must press this tab with a suitable instrument to release it.
ABE2011IQM01_C - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
87