Connection Of Accessories; Safety Instructions For Connecting Accessories - Ingeteam INGECON SUN 1Play 2.5TL M Manuel D'installation Et Usage

Connection of accessories

7. Connection of accessories
Throughout this chapter, the process is explained for connecting the optional accessories in the unit, including the
communication accessories, along with the potential-free relay and the digital input.
Optionally, a communication system can be installed in order to establish a connection with the unit to monitor
and configure it, either locally or remotely, depending on the type of communication chosen and the needs of the
installation.
As standard these units have local communication via USB. In addition there is the option of establishing
connections using other technology types. Depending on the type of technology, the connections will be made in
the INGECON Comm or INGECON Connect connectors:
Ethernet TCP (including communication via RS-485, for optional use)
Communication for the direct self consumption kit
If using communication via the optional RS-485 in each communication accessory, do not use it
simultaneously with the standard USB communication.
See the corresponding communication accessories manual for further information.
Read carefully before starting the connection process.

7.1. Safety instructions for connecting accessories

Consult section "Important Safety Instructions" and the following instructions before working on the
unit.
ABE2011IQM01_C - Installation and Operation Manual
Connection of the communication accessories
Communication accessory
RS-485
Wi-Fi TCP
Ingeteam
Connector
INGECON Comm
INGECON Connect
79
DE
EN
ES
FR
IT
PT