Ibiza Light LED8-QUAD Manuel D'utilisation page 5

AUTO program
1. Press the MENU button until "AUTO" is displayed, press ENTER.
2. The Display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" or "OFF".
Sound Active mode
1. Press the MENU button until "SOUN" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to activate sound active
mode, or "OFF" to deactivate sound active mode.
3. Press ENTER, then press and hold the MENU button for at least 3 seconds to activate.
Sound sensitivity
1. Press the MENU button until "SENS" is displayed, press ENTER.
2. A number between 0-100 will be displayed. Press the UP or DOWN buttons to adjust the sound sensitivity. 0 being
the least sensitive and 100 being the most sensitive. When you have found your desired setting press ENTER to
confirm.
Tilt Inversion
1. Press the MENU button until "TINT" is displayed, press ENTER. Either "YES" or "NO" will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons until YES is displayed, press ENTER to confirm. To
deactivate Tilt inversion, select NO and press Enter.
Display back light
1. Press the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to keep the LED display
on at all times, or "OFF" to switch to have the LED display switch off after 10 seconds.
3. Press ENTER and then press and hold the MENU button for at least three seconds to confirm.
Display Reverse 180°
1. Press the either the MENU button until "DISP" is displayed, press ENTER.
2. Press the UP button to select "DSIP" to reverse the display, or "DISP" to change the display back.
3. Press ENTER to confirm.
Self test program
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test. Press MENU to exit.
Reset
1. Press the MENU button until "Reset" is displayed. Press the ENTER button and the unit will reset itself.
DMX CHANNELS
10 channel definition table
Channel DMX Value
1 0---255
2 0---255
©Copyright LOTRONIC 2016
Function
Y1
Y2
LED8-QUAD Page 5