Switching On The Appliance For The First Time; Settings - Gaggenau DF 280 Notice D'utilisation

Switching on the appliance for the first
time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
indicated on the display window at the top @:
Scroll with < >
Set with + -
Leave with t 3 sec.

Settings

Switching on the appliance for
the first time
Language
Time format
Time setting
Water hardness
Rinse aid disp.
Settings
The dishwasher has been preset with certain settings
for your convenience. You can change these factory
setting.
Change the setting as follows:
1.
Open the door.
2. Switch on ON/OFF switch (.
Press Info button ( 8 for 3 seconds until the
3.
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with t 3 sec.
Setting
Time setting
Time format
Time display
Language
Water hardness
Rinse aid disp.
* depending on the features of your dishwasher
Factory setting
American English
24h
12:00
°E 0
Level 5
Factory setting Infotext
by pressing Info button (
12:00 Set the current time.
24h 12h or 24h.
Time Show end of wash cycle with display "Finish in" or "Finish at".
American English Language selection.
°E 0 Setting water hardness. When using Multitabs, select the lowest
setting.
Level 5 Amount of rinse aid affects drying. When using Multitabs, select
setting 0.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1. Keep pressing button > )* until the required setting
is displayed.
Make the selection with setting buttons + - X.
2.
Press and hold the Info button (8 for 3 seconds.
3.
The selected setting has now been stored.
Infotext
by pressing Info button (
Language selection.
12h or 24h.
Set the current time.
Setting water hardness. When using Multitabs, select the
lowest setting.
Amount of rinse aid affects drying. When using Multitabs,
select setting 0.
4. Keep pressing button > )* until the required setting
is displayed.
5. Make the selection with setting buttons + - X.
6. Press and hold the Info button ( 8 for 3 seconds.
The chosen setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note: When you reset your dishwasher to the factory
settings, you are taken directly to the settings for

switching on the appliance for the first time.

en-us
Getting Started
13