Switching On The Appliance For The First Time - Gaggenau DF480 Notice D'utilisation

Switching on the appliance for the first
time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
indicated on the display window at the top @:
Scroll with < >
Set with + -
Leave with t 3 sec.
Settings
Switching on the appliance for
the first time
Language
Time format
Time setting
Water soft setting
Rinse aid setting
Factory setting Infotext
by pressing Info button (
American English Language selection.
24h 12h or 24h.
12:00 Set the current time.
°E 0 - 8 soft Setting water hardness. When using Multitabs, select the
lowest setting.
Level 5 Amount of rinse aid affects drying.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1. Keep pressing button > )* until the required setting
is displayed.
Make the selection with setting buttons + - X.
2.
Press and hold the Info button (8 for 3 seconds.
3.
The selected setting has now been stored.
en-us
Getting Started
13