Day To Day Operation; Switch Your Receiver On/Off (Standby); Select Tv/Radio Mode - Philips DTR 300/00 Mode D'emploi

DTR 300 sans esp_140205.qxd
6

Day to day operation

6.1 Switch your receiver ON/OFF
(standby)
Your receiver is in standby mode (the red LED is on).
To wake up your receiver:
- Press one of the following remote control buttons: <P+>,
<P->, <OK> or a number button.
- Alternatively, press the <Standby> button on the front
panel.
You are watching digital TV (the green LED is on) or
listening to digital radio (the green/orange LED is blinking).
To put your receiver in standby:
- Press the remote standby button.
- Alternatively, press the <Standby> button on the front panel.
Your receiver, as any electronic equipment,
consumes power. In order to reduce power
consumption, please switch your receiver to
standby whenever you are not using it. For
maximum energy saving we recommend you switch
off the receiver by unplugging it from the mains if
you are not using it for a long period of time.
6.2

Select TV/Radio mode

Your receiver is in TV mode.
To switch to RADIO mode:
- Press the <TV/RADIO> button.
Your receiver is in radio mode
To switch to TV mode:
- Press the <TV/RADIO> button.
14/02/05 16:16 Page 17
DAY TO DAY OPERATION 17