ENGLISH
26
b) Do not use the power tool if the switch does not
turn it on and o . Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of child-
ren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may a ect the power
tool's operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power
tool for operations di erent from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger speci ed by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of re when
used with another battery pack.
b) Use power tools only with speci cally designa-
ted battery packs. Use of any other battery packs
may create a risk of injury and re.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals toge-
ther may cause burns or a re.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritati-
on or burns.
6) Service
a) Have your power tool serviced by a quali ed
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Safety instructions for Cordless lawn
mower
Danger of injury !
Never put your hands and feet near the rotating parts.
Keep a distance from the ejection opening at all
times.
When working with this machine, do not use spare
parts other than those recommended by us. Using
spare parts not recommend by us can result in
serious injuries to persons or damage to the
machine.
Keep children and other persons including animals in a
safe distance when using the appliance. Minimum safe
distance is 5 m.
Wear personal protective equipment. Wear solid shoes
and long trousers. Never use the appliance when
barefooted or in light sandals. Wear protective gloves if
necessary.
Check carefully the terrain where the appliance is being
used and remove any items that could get caught and
be thrown away.
Avoid operating the equipment in wet grass, where
feasible;
All protection covers and safety devices must be
correctly attached to operate the device.
Never remove the collection bag when the machine is
being operated.
Before using, always visually inspect to see that
the blades, blade bolts and cutter assembly are not
blunt, worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance;
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in con ict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged or
safety equipment is defective. Replace any worn-out
and damaged parts.
Do not start the engine before your feet are in a safe
distance from the cutting tools.
Do not incline the appliance when being started.
Do not start the appliance when you are standing in
front of the ejection opening.
Do not race when working with the appliance. Walk
slowly and cautiously.
Be careful when going backwards – risk of tripping!
Make sure your posture is safe, especially on slopes. Do
not cut on too steep slopes. Be particularly careful when
changing travelling direction on slopes.
On slopes always go straight to the slope and not up
and down.
Pay maximum attention when turning around and
pulling the appliance to you.