Names Of Parts; Front Panel; Rear Panel - Pioneer NXS-GW Mode D'emploi

Names of Parts

Front panel

1 /ON switch
Press to turn the power on and off.
2 ON indicator
Lights when this unit's power is on.
3 ALERT indicator
! Flashing: This unit's functions are restricted. Contact your store of purchase or a service center (page 10).
! Off: The indicator is off when the power is off, or when the power is on and the unit is operating normally.
4 PRO DJ LINK indicator
! Lit: This indicator lights when a PRO DJ LINK compatible DJ device is connected to this unit and this system can be used.
! Flashing: The indicator flashes when a PRO DJ LINK compatible DJ device is connected to this unit but this system cannot be used (page 10).
! Off: The indicator is off when nothing is connected or when the power of the device connected to this unit is off.
5 INTERNET indicator
! Lit: This indicator lights when communications with the web server have been verified and this system can be used.
! Flashing: The indicator flashes when communications with the web server have been verified but registration of the club information has not
been completed (page 10).
! Off: The indicator is off when nothing is connected or communications with the web server cannot be verified.

Rear panel

AC IN
1 AC IN
Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the
power cord.
2 INTERNET terminal
Connect to a router, etc., that is connected to the Internet.
3 PRO DJ LINK terminal
Connect to the [LINK] terminal of a PRO DJ LINK compatible Pioneer DJ mixer or to a switching hub (commercially available).
Use a 100Base-TX-compatible switching hub. Some switching hubs may not operate properly.
4 Kensington security slot
CAUTION
Do not connect the LAN port to any network which are subject to overvoltages.
NXS-GW
ON ALERT
1 2 3
1
PRO DJ LINK INTERNET
4 5
INTERNET PRO DJ LINK
2 3 4
5
En