Operating Instructions - Medela Clario Toni Mode D'emploi

Operating instructions

CAUTIONS
The Clario Toni is to be set up in such a way, that
a separation from the mains supply can be easily
managed� Calibrate the rechargeable battery
before the first use�
Connect Clario Toni to mains power
1� Check the pump before use following the instruction in
chapter "Preparation for use"�
2� All versions:
or
If the pump is
operated using
the optional
car connection
cable:
or
If the pump is
operated with
the recharge-
able battery:
18
Plug in the mains plug of the power
cord to a fixed mains socket�
Connect the optional 12 V DC
connection cable to the socket on
the side of the pump and connect
it to the 12 V DC power source
(cigarette lighter in the car)�
No connection to a power source is
needed� Make sure that the battery
was charged for five hours�