Operating instructions
CAUTIONS
The Vario 18 is to be set up in such a way, that it
can easily be unplugged from the mains socket.
Connect Vario 18 to mains power
1.
Check the pump before use following the instruction in
chapter «preparation for use».
2. All versions:
or
AC / DC
version: (if the
pump is
operated using
the optional
car connection
cable)
or
AC / DC
version: (if the
pump is
operated with
the rechargeable
battery)
Plug in the mains plug of the power
cord to a fixed mains socket.
Connect the optional 12 V DC
connection cable to the socket on
the side of the pump and connect
it to the 12 V DC power source
(cigarette lighter in the car).
No connection to a power source is
needed. Make sure that the battery
was charged for five hours.
17