ETNA AIP690WIT Mode D'emploi page 55

INSTALLATION
• The hood is fitted with a temporary suspension system with sliders
to make it easier to mount. To use this system, the recess must
have a suspension flange to suspend it temporarily (maximum
height 115 mm).
260
115
4x
Attention: the flange must be sufficiently strong to support the cooker
hood across 4 points.
• The ceiling/chimney must be fitted with a bar that has a minimum
thickness of 36 mm to which the extraction hood can be attached
with the 4 screws. Remember to check the position of the mounting
holes.
4x
• Preferably fix the bars so the short sides are parallel to each other.
662
EN 13