SETTING THE TENSION
If the belt is too loose in general (if it flatters), use the hex key to turn both screws a ½
turn clockwise. Then check the belt's tension.
Caution: Carefully adjust the belt using the screws and as few turns as possible.
BELT DRIFTS LEFT
If the belt drifts left, use the hex key
• t o turn the left screw a ½ turn clockwise and
• t he right screw a ½ turn counterclockwise.
Then check the belt's position.
67
SP-TM-4216e-IM-06-DE+GB+FR .indb 67
15/6/2016 18:41