Opening – closing door
handle outside fire
Fire door opening-closing
handle;
- Opening: anticlockwise
- Closing: clockwise
1.5 Permissible use and fuel
The pellet stoves work exclusively on pellets in different types of wood complying with Standard DIN plus 51731 or
UNI EN 14961-2 or Ö-Norm M 7135 or having the following characteristics:
Heat value
Density
Moisture
Diameter:
Ash percentage
Length:
Composition:
Packing
The pellet hopper is at the back of the stove. The door is located in the top part and pellet loading occurs manually
only with the stove off, making sure not to overfill.
The use of pellets with characteristics different from those tested by the technician during first lighting involves a
new setting of the stove pellet loading parameters; this operation is not covered by the warranty.
Store the pellets in a dry place.
For reasons of regular and efficient operation, pellets or other fuels cannot be manually loaded
in the brazier
Do not load non-conforming fuels in the hopper.
Do not load foreign bodies such as containers, boxes, bags, metals, etc., in the hopper.
The use of poor quality and non-conforming pellets damages and compromises stove
operation, invalidating the warranty with the exclusion of liability
of the manufacturer.
min. 4.8 kWh/kg (4180 kcal/kg)
680-720 kg
max. 10% weight
6 +0.5 m
max. 1.5% weight
min. 6 mm- max. 30 mm
100% untreated wood from the wood industry or post consumer without added binding
substances or bark, complying with current regulations
in bags made from environmentally friendly or biodegradable material or paper
Enter the hole in the
handle standard set
forth in the detail
below and turne the
outside door
To open the door, fit the handle
supplied and turn it
anticlockwise
39
WAVE acciaio – vetro 2011