Publicité
Les langues disponibles
Les langues disponibles
Every installation must provide for an easily accessible technical space for periodical maintenance.
The stove is provided with 4 adjustable feet to facilitate positioning on not perfectly flat floors. To adjust the height,
tilt the stove slightly and turn the feet as required.
The stove is supplied with the ambient sensor fixed through a wrapper on the back of the stove; we recommend to
remove the wrapper and to locate the sensor in the best position possible as to improve the temperature registration
in accordance with the ambient context and the length of the cable.
As for temperature registration done at a certain distance we reccomend to install the ambient thermostat/ambient
programming clock-thermostat – see. par.4.8.
- The stove cannot be installed in bedrooms, bathrooms and in general in rooms where
another heating unit is already installed without an independent air inflow.
- With wooden floors, install a floor protection base in conformity with the current regulations.
- Suitable fire-prevention devices should be arranged for any eventuality.
- Do not install the stove in places with an explosive atmosphere.
All'interno dell'imballo della stufa viene collocato il coperchio opportunamente confezionato : aprire la confezione
con cautela , controllare l'integrità del pezzo e al termine del piazzamento della stufa installarlo come segue :
X-controllare la presenza delle viti negli inserti filettati sulla superficie inferiore del coperchio e registrare la distanza
per l'inserimento sulle cave dei supporti superiori stufa .
Y-montare il coperchio dal lato posteriore inserendo le teste delle viti nelle appropriate sedi dei supporti come da
figura .
Z-bloccare il coperchio in posizione fissando con gli arresti posteriori come da figura .
X
Y
Z
DETAIL A
SCALE 1: 10
SCREW INSERTED
DETAIL A
SCALE 1: 10
DETAIL B
SCALE 1: 10
Fixing screws
REAR STOPS
40
FOCUS HR
Publicité
