Use - Agilent Technologies TwisTorr 84 FS AG Mode D'emploi

The TwisTorr 84 FS AG Navigator belongs to the second installation (or
CAUTION!
overvoltage) category of the EN 61010-1 standard. Therefore, connect the device
to a mains line that complies with the above category. The TwisTorr 84 FS AG
Navigator has Input/Output and serial communication connectors that must be
connected to external circuits in such a way that no live parts of electronic board
are accessible. Make sure that the insulation of the device connected to the
TwisTorr 84 FS AG Navigator is adequate even in the case of a single fault as
per the EN 61010-1 standard.
For installation of optional accessories, see "Technical Information".

Use

This paragraph details the main operating procedures. Prior to
operating the Turbo controller, make all vacuum manifold and
electrical connections, referring to the turbo pump instruction
manual.
TwisTorr 84 FS AG Navigator Controller User Manual / 87-901-038-01 (A)
Instructions for Use

Use

137/192
16