EINHELL NEW GENERATION NSG 180 F Mode D'emploi page 12

Anleitung NSG 180 F_SPK1
GB
Safety clothing
1. While working, the welder must protect his entire
body from radiation and burns by wearing
suitable clothing and a face guard.
2. Slip-on gloves made of a suitable material
(leather) must be worn on both hands. They
must be in perfect condition.
3. Suitable aprons must be worn to protect clothing
from sparks and burns. A safety suit and, if
necessary, head protection must be worn if
required by the type of work in question, e.g.
overhead welding.
4. The protective clothing used as well as all
accessories must be in compliance with the
"Personal safety equipment" EU Directive.
Protection from radiation and burns
1. Provide information about the risk to eyes at the
working site in the form of a poster with the
wording "Caution – do not look at the flames".
Workplaces are to be screened off wherever
possible so that personnel in the vicinity are
protected. Unauthorized persons are to be kept
away from the welding work.
2. The walls in the immediate vicinity of stationary
workplaces should not have a light color or a
sheen. Windows up to head height are to be
protected against radiation passing through them
or reflecting off them, for example by coating
them with a suitable paint.
12
03.05.2006 12:08 Uhr Seite 12
4. SYMBOLS AND TECHNICAL DATA
EN 60974-6
S
~ 50 Hz
U 0
55 A/20.2 V-
160 A/24.4 V
Ø
I 2
t w
t r
1(3) ~ 50 Hz
U 1
I 1max
I 1eff
IP 21 S
H
The set is interference-suppressed in compliance
with EC Directive 89/336/EEC
European standard for arc
welding sets and welding power
supplies with limited on time
(Part 6).
Symbol for welding power
supplies which are suitable for
welding in environments with
increased electrical danger.
Alternating current and rated
frequency value [Hz]
Rated idling voltage [V]
Maximum welding current and
the corresponding standardized
operating voltage [A/V]
Electrode diameter [mm]
Welding current [A]
Average load time [s]
Average reset time [s]
Line input; number of phases,
the alternating current symbol
and the rated frequency value
Line voltage [V]
Highest rated value of the line
current [A]
Effective value of the highest line
current [A]
Protection type
Insulation class