General Operation - Laserworld tarm Série Mode D'emploi

Manual: tarm Series

8. General Operation

1. Power
Connect the power cord to the device and to the mains. Make sure that your device is pro-
vided with the correct voltage. Wrong voltage could lead to irreparable damages. Please
find the correct voltage data in the synoptical table at the end of this manual. Make sure
that the device is not directed to people or inflammable objects during installation. To
start the device, connect the interlock bridge and switch the device on. The "Emission
- Laser on" LED at the front side of the device begins to light up when the device is
ready for use.
2. Key Switch
There is a key switch at the back of the laser system. Please plug the key to the switch and
turn it on. The laser device only runs when the key is inserted and switched on. Prevent
misuse! Unplug the key when the laser is unattended to prevent misuse of the sys-
tem.
3. Safety Presets
This device has an integrated Scan Safety (SFS). Is the Scan Safety active (on), single be-
ams are prevented. If the Scan Safety is switched off, it is possible to create full power
single beams - be careful!
Operating the laser system with disabled SFS may not be allowed in some countries.
Always ensure that maximum permissible exposure (MPE) is not exceeded in areas
accessible to the public or members of staff.
4. X / Y Inversion
Use the X, Y, and/or X/Y buttons to invert the beams resp. patterns on the x-axis and/or
y-axis.
5. Colors
Use the ‚red' , ‚green' and ‚blue' knobs to control the intensity per output color channel.
6. Modes / Functions
The different operation modes can be selected with using the DIP switches at the back of
the device. Any change of the operation mode requires a restart of the device (dis-
connect power and reconnect it again). Do not change any DIP switch settings during
operation. Random and dangerous laser output can occur!
7. Turn device off
To turn off the device, turn the key to ‚OFF' and disconnect the power cable from the
mains.
page 9 / 67