End Of Charging - XciteRC X-PERT X90T Mode D'emploi

Charging mode Pb-batteries · End of charging

End of charging

• If the battery is fully charged, FULL appears in the display, as well as an acoustic signal sounds for about
10 seconds.
• NOTE: if the charging process is terminated by safety timer, the display will show STOP. Check the
charging parameters and start the charging process again if necessary.
• When charging is complete, the battery can be disconnected from the charger. If the charger is no longer
needed, it should be disconnected from the power supply.
X-pert Charger X90T
again press BACK.
This display shows the voltage curve for
charging or discharging.
Press to go back a layer.
Press STOP to go to the charge current
menu.
Press to go back to the charge menu.
EN
31