Publicité
Les langues disponibles
Les langues disponibles
storage
storage Notes
Proper cleaning and lubrication of certain
i
components of the SMART Roller are critical
to prolonging the life of the components.
If after extended use the plunger has a
tendency to stick, apply a generous amount
of petroleum jelly located on the end of the
plunger (see Lubricating the components,
step 2).
When storing the Smart Roller, make sure
the fill valve is pointing downward, and
never store the Smart Roller with the fill tube
inserted into the fill valve.
Attention
lubricatinG the componentS
1.
Turn the locking collar as shown until the main tube
slides easily off of the plunger.
2.
Lubricate around and in between the plunger O-rings
with petroleum jelly.
3.
Re-insert the plunger back inside the main tube. Make
sure the O-rings do not twist or cut.
4.
Tighten the locking collar.
5.
Lubricate the inside of the fill valve housing on the main
tube with petroleum jelly.
6.
Clean and lubricate with petroleum jelly the indicated
areas on the roller arm.
7.
Reassemble roller cover. Place back onto roller arm.
8.
Attach roller arm to head.
Connecting areas
6
Seal
O-ring
6
eN
7
1
2
3
4
5
8
Publicité
