Maytag MHW4200 Guide D'utilisation Et D'entretien page 11

8.
Select CYCLE*
Turn cycle knob to select your wash cycle. See "Cycle Guide" for
details on cycle features.
9.
Adjust settings, if desired*
The display will show the default settings for the selected cycle. To
adjust a setting, touch its name – Temperature, Soil Level, or Spin
Speed. Adjusting settings will change the Estimated Cycle Time.
Tightly packing the load, unbalanced loads, or excessive suds may
also cause the washer to increase the cycle time.
10.
Select any additional options*
To add an option to the cycle, touch its name – Steam for Stains,
Extra Rinse, Fresh Spin, or Cycle Signal. To remove an option from
the selected cycle, touch the option again.
11.
Setting a delayed start
If you do not want to begin a cycle immediately, you may choose
the DELAY START option. This will delay the start of the wash
cycle by up to 12 hours.
To set a delayed start:
1. Touch DELAY START + and – to set the desired delay time.
2. Touch and hold START to set the delay. The delay countdown
has started when the START light stops blinking.
* Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
11