i-tec C31DUALDPDOCKPD Mode D'emploi page 8

i-tec USB-C Dual DP Display Dock with PD 100 W
SYSTEM REQUIREMENTS
Hardware Requirements: Device with a free USB-C or Thunderbolt port
Requirements for Power Delivery feature: device with a free USB-C
or Thunderbolt 3 port with Power Delivery support.
Operating system: Windows 10, macOS and Linux with the latest updates
*
macOS does not support Multi Stream Transport (MST) technology.
*
Connecting two monitors to the station on macOS will result in both
monitors showing the same image.
DRIVER INSTALLATION
Windows 10 32/64bit: After connection, the drivers for the docking
station are installed automatically on the system. Before installation
make sure that your system has installed the latest drivers for your
device and updated BIOS.
macOS X: Installation of the drivers in macOS X is automatic. Before
installation make sure that your Mac has installed the latest OS for your
device.
CONNECTING A DISPLAYPORT MONITOR
The docking station is fitted with 2x DisplayPorts for connecting external
monitors to a DisplayPort interface. Modern plasma, or LCD monitors
and TVs, will serve as the perfect display device of choice. The graphics
chip at the heart of the docking station supports up to 5x K 5120x2880
resolution @60Hz. Connect the monitor to the docking station using a
high-quality HDMI cable. The screen of your laptop, Mac, tablet or PC
may flash while installing the external monitor - this is normal.
- 1 monitor connected via 2 DisplayPort cables
- resolution up to 5K 5120x2880/60Hz.
8 |
ENGLISH
ENGLISH