Motion Sensor - Loewe Assist Media Mode D'emploi

Start-up
Display
Switching off after
The duration for which the display is active can be set.
Illumination
The illumination of the keyboard can be switched on or off.

Motion sensor

The sensitivity of the motion sensor can be set.
Switch-on protection
You can prevent unintentional switching on of the display, e.g. during clean-
ing or transport or reduce the power consumption, if you are not using the
Assist Media for a prolonged period.
Press the ROOM button.
  Select RCU settings. Confirm with OK.
  Select Display. Confirm with OK.
  Select Switch off after. Confirm with OK.
Enter a duration of 15 to 60 seconds.
5&8 VHWWLQJV
'LVSOD\
6ZLWFK R DIWHU
 VHF
,OOXPLQDWLRQ
0RWLRQ VHQVRU
5RRP 
 
➠
Call the Illumination function as described under
Display.
  Select Illumination. Confirm with OK.
 Select the option on or off. Confirm with OK.
➠
Call the Motion sensor function as described under
Display.
  Select Motion sensor. Confirm with OK.
 Set the desired value (3 - 9, factory setting: 6).
Confirm with OK.
Press the ROOM button and then the STOP button.
Press the button combination again or position the remote
control in the charging cradle to cancel the switch-on
protection.
RQ

37 -