Clock Display - Toshiba RAS-B10SKVP-E Mode D'emploi

RASseries_OwnersManual.book Page 13 Tuesday, January 9, 2007 4:48 PM
Combined timer (Setting the ON and OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air conditioner after you go to sleep, and start it again in the morning when you wake
up or you return home.
Example:
To stop the air conditioner and start it again next morning
Setting combined TIMER
(1) Press the OFF button to set the OFF timer.
OFF
(2) Press the ON button to set the ON timer.
ON
(3) Press the SET button.
SET
ON timer —> OFF timer
(Stop —> Operation —> Stop)
You can use this setting to start the air conditioner when you wake up and stop it when you leave the house.
Example:
To start the air conditioner the next morning and stop it
Setting combined TIMER
(1) Press the ON button to set the ON timer.
ON
(2) Press the OFF button to set the OFF timer.
OFF
(3) Press the SET button.
SET
• The ON or OFF timer function that is closer to the current time is
activated first.
• If the same time is set for both ON and OFF timers, no timer
operation is performed. Also, the air conditioner may stop
operating.
Daily combined timer (setting the ON and OFF timers simultaneously and activating every day)
This feature is useful when you want to use the combined timers at the same time every day.
Setting combined TIMER
(1) Press the ON button to set the ON timer.
ON
(2) Press the OFF button to set the OFF timer.
OFF
(3) Press the SET button.
SET
(4) After step (3), an arrow mark (
SET button during this flashing.
SET
• Both arrows ( , ) are shown while the daily timer is activated.
Cancelling timer operation
Press the CLR button.
CLR

Clock display

During TIMER operation (ON-OFF, OFF-ON, OFF timer), the clock time indicator is not
shown so the setting time can be displayed. To view the current time, press the SET
button briefly and the current time will be displayed for about 3 seconds.
or ) flashes for about 3 seconds. Press the
13
Operation
Stop
Operation
Stop
CAUTION
Approximately 3 seconds later, the remote controller will
transmit the signal to the indoor unit and a receiving beep
will sound from the indoor unit after you press the
SET button.
SET
c
a
b
Operation again
Stop
EN