Temporary Operation; Cleaning Operation - Toshiba RAS-B10SKVP-E Mode D'emploi

Masquer les pouces Voir aussi pour RAS-B10SKVP-E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RASseries_OwnersManual.book Page 18 Tuesday, January 9, 2007 4:48 PM
HINTS FOR ECONOMICAL OPERATION
Maintain room temperature at a comfortable level
Clean the air filters
Clogged air filters impair the performance of the air conditioner. Clean
them every two weeks.
Never open doors and windows more than necessary
To keep cool or warm air in the room, never open doors and windows more
than necessary.
Window curtains
During cooling operation, close the curtains to avoid direct sunlight.
During heating operation, close the curtains to keep the heat in.
Use the timer effectively
Set the timer for the desired operating time.
Allow uniform circulation of room air
Adjust the air flow direction for even circulation of room air.

TEMPORARY OPERATION

Temporary operation
This function is used to operate the unit temporarily in case you misplace the remote
controller or the batteries are used up.
• Push the RESET button to start the automatic operation (AUTO).
• While the temporary operation is activated, the remote controller operation is disabled.
• Hold down the button for 10 seconds to start the cooling operation.

CLEANING OPERATION

Cleaning operation
This function is used to dry the inside of the air conditioner to reduce the growth of mold, etc. inside the air conditioner.
• When the unit shuts down after having operated for 10 or more minutes in the cooling or dry mode, the cleaning operation is started
automatically, and the S.CLEAN indicator on the unit's display panel turns on.
Cleaning operation duration
• The cleaning operation lasts for 4 hours if the unit has been operating in the cooling or dry mode for 10 minutes or more.
About the cleaning operation
• The cleaning operation will not make the room cleaner or remove the mold and dust already inside the air conditioner.
• During operation, a small amount of frost may be visible: this is normal and does not indicate a malfunction.
• The vertical airflow louvers open slightly.
• If an ongoing cleaning operation is suspended, the effect of the cleaning will be compromised.
• To forcibly stop the cleaning operation, press the
EN
Please clean
button twice during the cleaning operation.
18
Chilly
Control
Use the timer
effectively
Blows upward
Air flow
adjustment
Blows downward
I cannot find
the remote
controller
A temporary
operation feature is
provided!

Publicité

Table des Matières
loading

Table des Matières