Publicité
Les langues disponibles
Les langues disponibles
(1)
Open the paper fi lter horizontally so that the
suction hole in the paper fi lter is over the top of
the tank. (Fig. 30)
(2)
Before attaching the fi lter to the appliance,
bend the two folds in the cardboard approx.
90° in the direction of the arrow. (Fig. 31)
(3) Match the suction hole in the paper fi lter with
the suction opening of the appliance. Insert
the fi lter in the direction of the arrow as shown
in the illustration, so that the cardboard of
the paper fi lter goes past the stopper on the
suction opening. (Fig. 32)
Suction hole
Suction opening
(Inside of the tank)
Cardboard
Bend
Stopper
Suction opening
(Inside of the tank)
Paper fi lter
Fig. 30
Fold
90°
Fig. 31
Rubber
packing
Cardboard
Paper fi lter
Fig. 32
FLOAT MECHANISM
This appliance is equipped with a fl oat mechanism
to prevent water from entering in the motor when it
sucks in more than a specifi c quantity of water. When
the fl oat operates not to suck in water, turn off the
switch promptly and throw away water in the tank.
WARNING
○
With the fl oat working, do not continue
operation. Otherwise the temperature of the
motor may rise abnormally causing troubles
such as deformation of parts or motor burnout.
○
Avoid sucking in
detergent or foams. Before the fl oat works,
foams may spurt from the air outlet. If you
continue to use the appliance as it is, it will lead
to electric shock or failure.
LED LIGHT WARNING SIGNALS
This product features functions that are designed to
protect the tool itself as well as the battery. If any of
the safeguard functions activate during operation,
the mode display lamp indicates this by blinking
for about 30 seconds as described in Table 6. In
this case, follow the instructions described under
corrective action. (Fig. 33)
English
foaming liquid such as
Mode display
lamp
Fig. 33
21
Publicité
